SIP Communicator™

Hosted Telephony from Spitfire - save up to 60% of the cost of a traditional phone system

Spitfire’s SIP Communicator™ is an award winning hosted PBX solution which provides everything that you would normally expect from a business quality phone system, but without the high capital expenditure.

For further information about how Spitfire can get SIP Communicator working for your business please enquire here or telephone 0800 319 6000.

LIMITED FREE ON-SITE INSTALLATION OFFER – worth £320.00

 

Print this page

Order Now

salmon_upstream

SIP Communicator – the powerful, low cost telephone solution from Spitfire

Hosted Telephony uses Voice over IP technology to deliver enhanced telephony features at a substantially reduced cost for small businesses. Spitfire SIP Communicator is an award winning hosted solution designed for use by small and medium businesses who need modern communications at a fraction of the cost of a traditional telephone system.

Whereas typically even a small telephone system can cost thousands of pounds. The only capital expenditure with SIP Communicator™ is the cost of the phones, maybe a Power over Ethernet switch if over 4 extensions, and a small remote project management/configuration fee. The initial equipment and engineering cost compared with a telephone system is a reduction of 60%.

For a typical 6 user SIP Communicator™ system, the hardware cost is around £850.00. This includes voicemail, multi site operation, conference bridge, auto attendant and many other advanced features.

Save on line installation and rental

VoIP uses an Internet connection instead of ISDN or Analogue lines to connect to the national telecomms infrastructure. Spitfire SIP Communicator includes the Internet Connection to do this – meaning that everything is handled by Spitfire, giving you a single point of contact.

The cost of a Spitfire DSL circuit and analogue line is 75% cheaper to install than the cost of the equivalent ISDN2e circuit. The cost of renting Spitfire SIP Communicator and the DSL connection is around 10% lower than the equivalent cost of renting BT ISDN2e circuits and maintaining a traditional telephone system – PLUS cheaper calls.

SIP Communicator™ extensions cost £10.00 per month. The cost of the underlying IP Bearer circuit is significantly subsidised and costs from £12.00 for an ADSL Max Premium, to £59.00 for a 1:1 SDSL Circuit. Typically total running costs are the same as, or even lower than, a normal ISDN based telephone system – with far greater flexibility .

Better Features – More Flexibility

SIP Communicator™ is ideal for businesses which do not want to invest in a phone system that they may quickly grow out of,, or those which have rapidly-changing communication requirements. It is also suitable for companies that do not have a fixed office location or are frequently moving from one rented space to another. You can add or remove extensions without an expensive engineer visit – at as little as 24 hours notice.

Where a business has home workers or workers in many different locations, then SIP Communicator™ makes even more sense, as everyone can call each other free of charge and incoming calls can be routed to any location.

Some of the outstanding features that SIP Communicator™ includes as standard include:

  • Fully flexible call routing and re-direction.
  • Auto attendant features.
  • Voicemail to email.
  • Email alerts of missed calls.
  • Conference bridge facility.
  • Softphone compatible.
  • Easy to use web interface.
  • Call diversion and forwarding.
  • Log on from home/remote sites.
  • Full call records.

SIP Communicator™

SIP Communicator™ is hosted at Spitfire's secure data facility in Harbour Exchange Square in London Docklands.

Spitfire are one of the only SIP providers to have our own interconnect with BT, and provide our own ADSL/SDSL circuits; as all elements of the service are provided by our own network, we are able to control the call quality and ensure that you receive a business quality service.

Detailed below is an overview of the network.

SIP Communicator network overview

 

 

SIP Communicator™ Telephones - Snom range of SIP Phones

SIP Communicator™ is designed to fully integrate with the Snom range of SIP phones, these are stylish, affordable and robust handsets. They share some software design elements with the SIP Communicator™ platform, ensuring features are accessible and easy to use.

Yealink T28P

Yealink T28P

The Yealink T28P is the top of the range handset that allows a full range of features to be access quickly and efficiently. The phones have 6 user accounts and line keys, a back lit display, full duplex handsfree operation, 16 programmable keys, 10 of which include BLF capability, headset port and easy to use access to a wide range of traditional and SIP telephony feature .

Snom 360

Snom 360

The Snom 360 was designed for maximum productivity and efficiency in the everyday business environment. There are also Snom 320 and Snom 300 phones available in the range as well as a DECT Cordless – the Snom M3. Phones are also available in white – Snom Snow models.

FREE INSTALLATION OFFER

The Spitfire SIP Communicator is a self-install system and is easy for users to connect by themselves.

However for a limited time Spitfire are providing 4 hours of free on-site installation within the M25. Spitfire SIP Communicator is the only Hosted solution on the market to offer free on-site installation and training.

BUSINESS INFO MAGAZINE - SPITFIRE SIP COMMUNICATOR WINS EDITORS CHOICE AWARD

Business Info Magazine is one of the leading independent Office Equipment Magazines – providing independent reviews of office equipment to help purchasers make an informed decision.

Spitfire are proud to be the recipient of the coveted Editor’s Choice Award for our SIP Communicator hosted solution earlier this year.

www.binfo.co.uk